LED Strip Channel

These channels & diffuser covers can be custom cut into lengths and closed off with end caps.This turns each LED strip section into an attractive low profile fixture. Since they snap into mounting clips which you affix to your surface, they can be easily removed. Each meter length comes with 2 end caps and 2 mounting clips, so you will need an additional pair of end caps and clips for each additional section you divide the 1 meter section into. You will need to order them. LED profile strip was perfect solution to hiding led tape lighting under a cabinet does not have any lip or edge. The plastic end caps and plastic diffuser help make the whole thing look like a retail lighting fixture.

Aluminum channel LED Strip Channel can bring new decorative installation, and make your LED strip lighting look nicer and cleaner. The system is very easy to install and goes together very easily.

To install an LED strip lighting system, you need an LED strip light, an LED Strip Channel that performs as a mounting bracket as well as a heat sink, and a cover that will diffuse the light better.

First of all, mount the housing channel.

Secondly, take the LED strip light and run it right into the groove on the channel.

Lastly, take the diffuser/cover, and snap in over the light strip.

If you want to connect two strip lights together, the LED Strip Channel also provides room to hide the connection wire. Carefully collect the wires into the channel and put them behind the strip light before snapping in the cover. Your can DIY a strip lighting project like a pro with this channel!

LED Strip Channel provides an excellent aluminum look which provides a professional finish for any project. The installation appears easy as well.
LED Strip Channel not only provides great housing for LED flexible strip light, but also serves as a heat sink for them. The V-shape channel is better than the U-shaped channel in the following aspects.

1. It creates a 45° beam angle from a 90° surface.

2. The angle enables accurate mounting for installations at corners.